Polyx® Professional Color Oil is ready to use. Please do not thin.

1. Remove lid before use and stir well with a stick or similar implement.
2. To apply the product, replace the lid of the container firmly and pour directly onto the surface using the extendable pouring spout.
3. Apply the product very thinly and evenly with a wide paint scraper or the Osmo Professional Scraper.
4. Level the surface using a single or multi-disc buffing machine (Osmo FloorXcenter) with a white pad or brush attachment. All excess products must be removed. Having structured or bevelled floors remove excess in the bevel with a natural bristle brush or floor brush and level out the surface with a brush attachment only.

Tip: If the buffing machine starts to leave streaks because of over-application of the product, werecommend turning the pad over or replacing it. The brush attachment can be cleaned on an old piece of carpet. Allow drying overnight for at least 810 hours. Allow for good ventilatin. A colourless coat of Osmo Polyx® Professional Hardwax-Oil 5125 Clear must then be applied using the same method as for the Polyx® Professional Colour Oil (wide paint scraper or Osmo Professional Scraper).