| Products | Polyx®-Oil Raw




Osmo Polyx®-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture.

Untreated wood in its original form has a light, pale character from its natural 'raw' appearance. Sanded wood also has the same effect. Osmo Polyx®-Oil 3044 Raw is designed to retain this appearance by using a small amount of white pigments to neutralise the permanent 'wet-look' that develops after application of a clear finish.

Apply very thinly and brush out any white pigments from the surface before leaving to dry to acheive the desired results.


  • Approx. coverage: 30m²/L with one coat
  • No. of coats: 1 coat + 1 coat of Polyx®-Oil Original
  • Application temperature: +5°C
  • Drying time:  8-10hrs.
  • Sizes: 0.125L, 0.750L, 2.5L


  • Nearly invisible appearance, no 'permanent wet effect'
  • Light coloured wood stays light coloured
  • Extremely durable and hardwearing
  • Very water and dirt resistant
  • Resistant to common liquid spillages such as water, juice, tea, cola and wine
  • Saliva-resistant and sweatproof, suitable for children's toys
  • Microporous, breathable finish which does not crack, peel or flake
  • No sanding necessary for spot repairs or future applications


Made with high quality bristles with soft tips which gives fine control in achieving the desired effect. Make short work of large areas with exceptional coverage capacities to produce professional looking results every time. With a high quality beech frame and robust backing plate, simply attach the Osmo extendable telescopic handle for applying in comfort.

How-to Video


Made with microfibres to ensure high coverage allowing you to apply thinly, thoroughly and evenly along the wood grain and spread well. For first application, two coats in total is recommended onto a clean and dry surface. For renovation, just one coat is necessary.

How-to Video


  • For ingredient-rich hardwoods species use Osmo Wood Wax Finish Extra Thin.
  • Polyx®-Oil Raw is designed for sanded or raw wood only - not suitable for dark wood species.
  • Recommended application is 30ml/m².
  • If excessively applied, or if the surface has been sanded to a very fine grade of sandpaper - the white pigments can show visibly in some areas. In this scenario, the remedy is to sand the surface and finish with P120 and apply very thinly along the grain and spread well.
  • For best results, apply Osmo Polyx®-Oil Original as the second coat. This will also determine the final sheen, whether a 3011 Glossy, 3032 Satin, 3065 Semi-matt or 3062 Matt finish is required.
  • Multi-purpose cleaners such as washing up liquids and detergents are highly detrimental to the finished surface and is not recommended to be used as discolouration or staining may be possible.
  • Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining.



  • Oak untreated or sanded P120 only.
  • Pine untreated or sanded P120-150 only.
  • Spruce untreated or sanded P120-150 only.
  • Beech untreated or sanded P120 only.
  • Ash untreated or sanded P120 only.
  • Larch untreated or sanded P120 only.


  • Maple apply very thinly and carry out a trial application before use.


For all other wood species, always trial apply.